Qingdao Shuimu Induction Heating Equipment Co.,Ltd
Specifically For Domestic And Commercial Heating Equipment

Phone:86-13465321069

Home > News > Content
Induction Heater Heating Speed, High Thermal Efficiency

Reactor Induction heater is Jiangxin electronic electromagnetic heating products, the electromagnetic induction control board by the Foshan Jiang letter electronic manufacturing, with independent intellectual property patented technology. If the customer has special requirements can also be customized! Reactor electromagnetic heater is my company to design and develop a new type of heating energy-saving products, with a short heating time, heating speed, high thermal efficiency, safe explosion-proof, energy-saving effect is remarkable and other significant features, and the original production process, The program has no effect and change. The series of products are mainly applied to the chemical industry, food industry. After the transformation, energy saving can reach more than 30%.

Reactor electromagnetic heating works: chemical, food industry, the original reactor was the main use of boiler steam, heat oil and other means of heating chemical reaction. The original heating method of low efficiency, high production costs. Electromagnetic induction heating technology is the use of high-frequency alternating electromagnetic field generated in the eddy current, so that the metal barrel itself heat, so that the internal heating medium (water or chemical raw materials) heating. The use of electromagnetic induction heating energy saving effect is remarkable.

Performance: electromagnetic induction technology thermal conversion rate of up to 95%, 3D dynamic heating, from the inside out of the three-dimensional all-round heating, so to achieve heating speed, energy saving effect is significant, the water temperature of 80 degrees or more.

Environmental protection: equipment is running, do not release any harmful substances, smoke free, no fire, tasteless, truly zero emissions, the real green.

Reduce the cost: heating part of the cable structure, the heating cable itself will not produce heat, long life, eliminating the resistance due to high temperature aging and regular maintenance and regular replacement of the shortcomings, the basic no maintenance costs.

Electromagnetic induction heating equipment is now an environmentally friendly environmental protection and environmental protection equipment, by the heating industry favorite. This is because the efficient energy-saving Induction heater equipment is a new type of heating energy-saving products, with significant energy saving effect, heating speed, high thermal efficiency, reduce the production environment temperature, maintenance-free and other significant features, and the original production process, The operating procedure has no effect and change. So widely used in plastic processing and similar heating industry.

Electromagnetic induction heating equipment users are accustomed to electromagnetic heaters, most of them know that it is heating fast, can save power, but the actual operation of the specific or some worry. So, how to set the Induction heater display mode? Here to introduce:

When the electromagnetic heater is powered on, the default display of the highest position of the gear, the gear indicator light, press the left and right keys can change the display mode, from left to right, followed by: frequency, temperature, current, voltage and gear, The lights will follow the transfer, when converted to a mode, the digital tube will display the corresponding parameter values.

1, frequency: display the electromagnetic heating coil oscillation frequency, can be observed by observing the frequency value of the coil is appropriate;

2, the temperature: the general configuration, the display heat sink temperature; if the optional K-type thermocouple or infrared temperature measurement function, then display the thermocouple or infrared detection temperature, press the up and down keys to display the set temperature, 3 seconds back to real time measure temperature.

3, current: display the power supply input current.

4, the voltage: display the power supply input voltage.

5, electromagnetic induction heating equipment stalls: display stalls, press the up and down keys to adjust the power, no gear or rheostat adjustable power button up and down; if the optional K-type thermocouple or infrared temperature measurement function, the display temperature Parameter, press the up and down keys to adjust this parameter


Product
Contact Us

Qingdao Shuimu Induction Heating Equipment Co.,Ltd


Add:No.57-7, Xiangtan Rd, Licang, Qingdao, Shandong, China
Contact us:Kacy Meng
Tel:86-532-89980348
Fax:86-532-84623448
Mobile:86-13465321069
E-mail:sales@cmheat.com

View Our Events Calendar

2016

Redstarv

© 2016 | PRIVACY POLICY

Online Support

Tel:86-13465321069

E-mail:sales@cmheat.com

Get In Touch

Home | About Us | Product | News | Exhibition | Contact Us | Feedback | Mobile | XML